When a neighbor mentions they just had a radon mitigation system installed, it's natural to wonder about your own home. The reverse happens too: a neighbor tests low, and you assume your house must be fine. Either way, your neighbor's results can't tell you what's happening inside your walls. The only way to know your home's radon level is professional radon testing.
Here's why radon levels can vary so much from house to house in the same Raleigh or Durham neighborhood, and what to do with the information a neighbor shares.
Will My Home Have the Same Radon Level as My Neighbor's?
Not necessarily. Two homes on the same street, even ones built by the same builder at the same time, can have very different radon levels. The U.S. Environmental Protection Agency (EPA) notes that radon levels can vary widely, even from home to home in the same neighborhood.
A neighbor's high result is a good reason to test, and a neighbor's low result is not a reason to skip testing. In both cases, your own test is the only result that applies to your home.
Why Do Radon Levels Vary So Much Between Homes?
Radon is a naturally occurring radioactive gas that forms as uranium breaks down in soil and rock. How much of it ends up inside a home depends on a mix of factors, many of which change from one lot to the next:
- Soil and rock beneath the home: Uranium content and soil permeability can shift over short distances.
- Foundation type: Basements, slabs, and crawl spaces each interact with the soil differently.
- Cracks and openings: Gaps around pipes, sump pits, floor drains, and construction joints give soil gas a path inside.
- Air pressure: Homes often have slightly lower air pressure than the soil beneath them, which can draw radon in. Heating, exhaust fans, and weather all play a role.
- Ventilation and lifestyle: How a home is sealed, heated, and cooled affects how radon builds up or disperses.
To dig deeper into these factors, read our resource on why some homes have a high level of radon concentration.
My Neighbor Tested High for Radon. Should I Be Concerned?
A high result next door doesn't mean your home has high radon too, but it does tell you radon is present in the area. That makes testing a smart, simple next step. There's no need to panic. Radon is common, testing is straightforward, and elevated levels can be reduced.
Other radon professionals have written about this question as well. A-1 Radon in Wisconsin explains whether your neighbor's radon levels will be similar to yours, and their answer matches what we see across North Carolina: every home needs its own test.
My Neighbor's Radon Test Was Low. Can I Skip Testing?
We don't recommend it. A low result next door can give a false sense of security. Your home could sit over different soil, have a different foundation, or have openings that let more soil gas in. The team at Radon Pros of NM makes a similar point in their article on why your neighbor's radon testing results don't matter for your house.
The EPA recommends testing all homes for radon, regardless of what nearby homes show.
Have questions about your home? Our team can help.
What Radon Level Is Considered High?
Radon is measured in picocuries per liter (pCi/L). The EPA recommends fixing a home when radon levels are 4.0 pCi/L or higher, and considering action for levels between 2.0 and 4.0 pCi/L. The World Health Organization (WHO) uses a lower reference level of about 2.7 pCi/L.
According to the EPA, radon is the leading cause of lung cancer among nonsmokers and the second leading cause overall. Knowing your number is the first step toward lowering your risk.
How Should I Test My Home for Radon?
Short-term tests measure radon over a few days and are a quick way to get a snapshot. Long-term tests run for 90 days or more and give a better sense of your home's average level throughout the seasons.
Professional testing often uses a Continuous Radon Monitor (CRM), an electronic device that records radon levels hour by hour. A CRM can show how levels change throughout the test and can help flag conditions that might affect accuracy. Whichever method you use, follow closed-house conditions and place the test in the lowest lived-in level of the home.
If you're buying or selling, testing during the transaction is especially helpful. Learn more about our services for home buyers and sellers.
Can My Home's Radon Level Change Over Time?
Yes. Radon levels can rise and fall with the seasons, weather, and changes to the home itself. Finishing a basement, sealing up drafty windows, replacing an HVAC system, or settling of the foundation can all affect how much radon gets inside. That's why a test from years ago, or from a previous owner, may not reflect current conditions. The EPA recommends testing again after major renovations or if you start using a lower level of the home as living space, and many radon professionals suggest retesting every couple of years, even if earlier results were low.
What If My Home Tests High?
If your results come back at or above the EPA action level, a professionally designed radon mitigation system can lower levels. The most common approach, sub-slab depressurization, uses a vent pipe and fan to draw radon from beneath the home and release it safely above the roofline.
For homes built over a crawl space, crawl space sealing is often part of the solution. After installation, a follow-up test confirms the system is working.
Get Your Own Radon Answer in Raleigh and Durham
Your neighbor's results are a helpful conversation starter, but they can't replace a test of your own. First Choice Radon Remediation provides radon testing and mitigation throughout North Carolina, including Raleigh and Durham. Contact our team to schedule your radon test today.
